Newfab, Inc., has developed supply relationships with Original Equipment Manufacturer (OEM) customers in the Water Treatment industry providing turnkey manufacturing service for large scale equipment. Machinery and Equipment is manufactured and tested to customer specifications with end user final inspection (if required) done in our facility. Units are then disassembled for shipment directly to the site.
This unit has a capacity of 1,000 gallons per hour of waste process water producing 900 gallons of distilled water and 100 gallons of concentrated waste. Low pressure steam is used as the primary heat source and water is evaporated under vacuum at low temperature. The water vapor produced in the primary stage is used as a heat source in the secondary chamber improving the efficency and capacity of the system. The unit is made from AL6XN material to meet the corrosion resistance requirement for the application.
Above ground, upflow, deep bed, granular media filter made from 316L stainless steel features a continuous backwash system. The units are factory assembled to facilitate installation at the site and fully passivated to prevent corrosion.
These units are 860 gallon per minute gravity fed inclined plate clarifiers. They feature a compact design providing 10 times the settling surface area of a flat clarifier with a similar footprint. The units are made of carbon steel and have a rust inhibiting coating on the interior and an epoxy coating on the exterior. The settling surface is made from plastic and is inclined to allow particulates to slide down into the sludge tank below for disposal. The full line includes units that will process from 200 to 2,000 gallons per minute. The units are fabricated and assembled in the shop and then partially disassembled for shipment.